UrWealthwizard's Blog

In a nutshell, ‘Green Energy’ utilises natural resources such as sunlight, wind, tides and geothermal heat to provide our daily energy requirement. They’re all considered naturally able to replenish – and thereby ‘Green’. It is easy to think that we may be travelling back in time when we think of items such as wind power and windmills. Generally, this is the result of using up to date ideas, specifically those that are planet friendly and eco-efficient.

The home can use a range of new ideas to help with energy usage – including Solar Thermal and Solar Water Heating Collectors. To gain electricity from roof panels you would need solar electrical panels (PV’s). Another key element is that of Biomass Energy, which relates to Stoves and Boilers burning Wood, Fuel and Pellets. Of course, then there is the heating from the Sun – often just called Ground Source Heat Pumps. Finally, we have two of the most traditional forms of energy generation that have gone through some resurgence over the last few years; these being Wind Power, Wind Turbines and Hydropower (including Water Wheels.)

Thermal Solar Energy – This technology is based around two core types of system. First, we have Solar Water Heating Collectors, which absorb energy from the Sun and transfer this into hot water. Then we have the work of the Photovoltaic Heat Collectors, often called Solar Electrical Panels – which transform solar radiation into electricity. Typically, these panels are found on roofs – and need to be away from any light blocks such as trees, chimneys and other buildings.

With Solar Power being so common within the UK, it’s Solar Water Power that is most often used. With the capacity to deliver 50 percent plus of a household’s hot water requirement annually, Solar Water heating systems are crucial to energy in the UK. There are two options to fit these items. The first is to get a professional fit and the second is a DIY system, the first will cost around 2-5k and the second between 500 and 1500 pounds.

Biomass Energy Technology: Historically, this has come from plants and animals, though nowadays this also includes new genetcially engineered ‘energy crops’. Due to its adaptability, it can produce a range of energy forms – from heat and electricity through to combinations of both. It is interesting to note that the UK has some of the largest quantities of Biomass material to generate electricity within Europe. Considering all this, and the relative lack of C02 produced, makes the whole process highly green overall. To that end, many wood crops come from sustainable sources (as one tree is felled, another is planted in its place; thus the new tree absorbs the CO2 produced during the heating process.)

To meet the need, fast growing trees, known as Short Rotation Coppice (SRC) are utilised. Of equal importance is the ability to produce dry matter – and perennial grasses are very good for this. Of equal importance, although maybe less well known, are Municipal and Agricultural Waste. Agricultural Waste is commonly formed as a by-product of traditional agricultural work. However, waste derived from food or wood is another biomass entity – called Municipal Waste.

Geo-Thermal Energy Based Systems – Basically this is the warming of the Earth from the Sun – and is often used in the manufacture of warm water and electricity. By using the ground source temperature of approximately 12 degrees, we can either heat or cool buildings within the UK. Heat pumps are recognised as a very good form of power generation, generally giving back four units of energy for every one used. The energy generated by a heat source pump can in fact be considered 100 percent renewable, if the power to operate the pump comes from solar electrical panels or a wind turbine.

Systems Based On Wind Energy: In use for milling grain or pumping water, wind energy has been with us for a very long time, although its modern uses are complex. That aside, the ability to generate energy and both transfer this into the home or the local grid has been a relatively new option. In the European union, it is the UK which is seen to have the largest wind capacity. Although, within the UK we currently only utilise 1 percent of electricity from wind, yet the potential rests at a surprising 10 percent. Instead of producing electricity at a rate of 2-10p per kWh, we could be generating at 2p per kWh. From this, the estimation of the cost recovery period is around 6-9 months overall.

Finally, we have Hydropower; an area in which the UK does well within Europe. Just like a thousand years ago, we are utilising the energy from water. Interestingly enough, this type of energy production meets around 2 percent of the UK electrical total demand.

A hydropower system transforms the kinetic energy of the moving water into another type of energy by means of a turbine. By using a dam or a natural river drop, these turbines do not require water storage. It is by using the eroded national distribution systems, that allows for outdated sluices and dams to be used by techniques known as ‘Micro-Hydro’. Having said that, this process could still generate 200mW of the National Capacity. The capital cost of installing a micro-hydro system can run between 200 and 3000 pounds per kW of energy output.

It can be seen that the route to ‘Green Energy’ is growing considerably, especially in light of the need for increasing energy outputs throughout the Western World. The UK domestic market appears to be one of the core beneficiaries of this technology.

It is the drive for installations in the domestic sector that looks to favour jobs such as plumbers and electricians. It is the political view of this type of energy generation that results in grants and financial aid becoming ever-more prevalent. It is important to gain the correct qualifications to install these items. You could consider either plumbing or electrical training programs that highlight green installation.

Copyright Scott Edwards. Look at www.electricaltraininginfo.co.uk/SolarEnergyTraining.html or Solar Energy Courses.